QR code with logo
A QR code with your logo, your colours and a call to action
A plain black-and-white code gets scanned less than one that looks like it belongs to you. With QR Solutions you give a dynamic code your own colours, your logo in the middle and a frame with a short line of text, and it still scans with any phone camera. This page explains what you can change, how to keep the code reliable, and how to get it to the printer.
What you can style
- The colours of the code and its background, on every plan, with presets from your brand palette or any hex value.
- A frame with a call to action, such as "Scan for the menu", on every plan: a square or rounded border, or a banner above or below the code, in four text sizes.
- Your logo in the centre (PNG, JPEG or SVG), from Starter, with a slider for how much of the code it covers.
- The shape of the modules (square, dots, rounded, classy or extra-rounded) and separate shapes and colours for the three corner markers, from Starter.
- The error-correction level, L to H, from Starter, so a code with a logo can be told to tolerate it.
- A download as PNG, or as SVG for sharp printing at any size (SVG from Starter).
Step by step in the generator
- Enter the destination and make the code; the preview on the right updates with every change.
- Pick the colours of the modules and the background, from the presets or with any hex value, and check that the preview still scans with your phone.
- Add a frame and type the call to action; choose a border or a banner, and the text size.
- From Starter, upload your logo as PNG, JPEG or SVG and set its size with the slider; switch error correction to H in the advanced colour settings.
- Download PNG for screens or SVG for print. The code is saved as a dynamic code, so the destination can be changed later from its page.
Why a logo does not break the code
A QR code carries error correction: part of the pattern is redundant, so a scanner can rebuild what is missing. There are four levels, L, M, Q and H, which let roughly 7, 15, 25 or 30 percent of the code be covered or damaged and still read. A logo in the middle uses up some of that allowance. Set the level to H when you add a logo and keep the logo to about a fifth of the code's area, and a phone will read it as easily as a plain one; what the allowance does not cover is a logo that also sits on one of the three corner markers, which the scanner needs to find the code at all. Our generator keeps the logo centred for that reason.
Colours that still scan
Scanners look for dark modules on a light background. Any dark colour on any light one works: navy on cream, your brand violet on white. What fails is the reverse, a light code on a dark background, and low contrast, such as a mid-grey code on a pastel background or two shades of the same hue. The preview in the generator updates as you change colours; scan it with your own phone from the screen before you send anything to print.
Frames and the call to action
People scan a code more readily when the code tells them why. A frame with three or four words, "Scan for the menu", "Scan to book", "Scan for the manual", lifts scans measurably compared with a bare code on the same page. The frame is part of the download, so it prints with the code at the same resolution and in the same colours, and you do not have to lay it out in your design tool.
Getting it to the printer
Download SVG when the code is going to be printed. An SVG is vector: it scales from a business card to a billboard without going soft, and a printer can place it directly in the artwork. PNG is right for screens, e-mail and a quick test print. Whichever you use, keep the quiet zone, the empty margin around the code, at least four modules wide, and keep the code itself at least two centimetres square for anything read at arm's length.
A styled code is still a dynamic code: you change its destination later, and its scans are counted. The design and the destination are independent, so a restyle never changes where the code goes, and a redirect never changes how it looks.
Frequently asked questions
Which plan can add a logo?
A logo, module and corner shapes, separate corner colours and SVG downloads start at Starter. Colours and a frame are on every plan, Free included.
Does a logo make a code harder to scan?
A logo covers part of the pattern. Set error correction to H, keep the logo to about a fifth of the code, and test it with a phone before you print.
Which file format should I give my printer?
SVG. It is vector, so it stays sharp at any size. PNG is for screens and test prints.
Can I change the design after the code is printed?
You can, but the printed copies keep the old look. The destination is what you can change after printing; the design is fixed in the print.
Can I put a logo on a Free code?
Not yet: a logo starts at Starter. On Free you can set the colours and add a frame with a call to action, and the code is already dynamic.
Why does my printed code not scan?
Nearly always one of three things: too little contrast, a logo that is too large for the error-correction level, or no quiet zone around the code. Scan the preview from your screen first; if that works and the print does not, it is the print.